Tag Archives: DIY

How to Make a Chalkboard Tray

Standard

Just before Thanksgiving I came across the blog “My So Called Green Life” and their up-cycled picture frame serving tray.  I was bummed that I hadn’t discovered it in time for the Thanksgiving festivities, but I finally have had time to make one of my own!

I started the project with a framed picture from Goodwill.  I made sure to pick one with a substantial frame so that I could add some handles.  I purchased the hardware for the handles at the home depot for just a few dollars.  I also got some bronze paint to match the handles.

Once I disassembled the frame, I covered the glass with an awesome product…chalkboard contact paper!  It is just like the contact paper that grandma used to use to line her cabinets, only better!  The decorative side of the adhesive paper is a material that you can write on with chalk!  I decided to use this instead of chalkboard paint on this project.

I then pained the frame, added the handles, and put it all back together.  I think it turned out great!  I also plan to put magnets on the back so that I can use it as a chalkboard for my refrigerator!  I learned the hard way, however that the magnets that you get at the craft store are not strong enough!

Advertisements

DIY Christmas Wreaths: 5 Wreaths You Can Make to Decorate Your Home

Standard

Grape Vine Wreath

A few years ago, I thought that it would be fun to make a little wreath to help decorate my home for Christmas.  I expected it to be somewhat difficult and time-consuming, but the opposite was true!  It turns out that making your own christmas wreaths (if you start with a base) is really, really easy…and you get some gorgeous results!  The wreath that is pictured above is my own creation.  I just purchased a grape-vine wreath and some artificial flowers and berries from the craft store and threw it all together in less than an hour!  I just used hot glue and crafting wire to hold everything together, and made a little hook out of crafting wire for the back.  It was super simple, and has been a part of my holiday decorations for years!  It got me to thinking though, what other awesomely easy Christmas wreaths are out there to make?  I did a little searching and this is what I came up with.

One of my favorite looks for wreaths has been the cluster of christmas ornaments.  They are just so bright, shiny, and festive that you can’t help but stop to admire them!  Turns out, they are not too hard to make either!  I found a great tutorial on Matt and Becky’s Blog.  You can see their results below, and I have to say they did a beautiful job!

Matt and Becky's Ornament Ball Wreath

Recently, I have been seeing a lot of felt flowers around.  I love how soft and cute they are!  Jen, from Tater Tots and Jello has shared her sister’s awesome tutorial for how to make a gorgeous wreath and even provides a link showing how to make one of her favorite felt flowers.  It all came together quite nicely, and looks fantastic!

Felt Flower Wreath from Tater Tots and Jello

Recently, I have been intrigued by all of the awesome things that you can do with paper…particularly recycled paper.  I have seen many, many fun crafts that can be done using old toilet paper tubes.  Of course, making a wreath out of them is on the list!  See you there design provides a great tutorial for making a really cute wreath out of recycled toilet paper and paper towel tubes.  Just don’t forget the most important tool of all…that glass of your favorite wine!

See You There Design's Cardboard Tube Wreath

Finally, it wouldn’t be right to have a post about Christmas wreaths without a tutorial on how to make the classic fresh fir wreath.  Let’s be honest…nothing beats the real thing!  Save-on-Crafts has a great post with directions for how to make your own fresh greenery wreath.  There is also some discussion about different wreath forms and many more ideas for making some awesome wreaths!

Fresh Wreath

Holiday Gift Wrapping: How To Make Your Own Fabric Gift Bows

Standard

My obsession with paper tends to get a little out of control around the holidays.  There are so many lovely, cute, and just plain awesome gift wrapping options available that I find it hard to hold back on not buying them all!  Last year, I promised myself that I would not buy any new wrapping paper until I used what I had.  It was tough.  Really, really tough.  But I did it, and we all know what that means!  I am free to buy loads of new paper this year!  I have several rolls already, and I am going to be honest, there will probably be more!

Gift giving tends to get a little out of control right along with the paper buying.  I usually set a budget for myself, and blow it out of the water in a matter of days!  This means, however, that I will have even more beautiful presents to adorn the space beneath my tree.  In my opinion, the wrapping is nearly as important as the gift itself!  I have spent years perfecting my wrapping skills, but there is one thing that I feel really makes the gift wrapping shine….and that is the bow!  I will admit that I have been guilty of buying the giant bag o’ bows from the seasonal section of the grocery store.  They are just too affordable to ignore, but instead of slapping a mass produced bow on every gift, i like to mix it up with a few of my own hand made varieties.

This year, I made a design for a cute little paper bow.  They are designed so that I can either put some tape on the back and stick them to the gift directly, or I can run a ribbon through the back for an even more classic look!

These bows are great for smaller presents, but for the large gifts, nothing beats a big, beautiful, fabric gift bow!  I like to use ribbon with wire edges, as they are easier to shape once they are assembled.  The length and width of ribbon that I use depends on the size of the bow, and the number of loops.  In the example below, I used about 6′ of 1.5″ wide ribbon for the bow itself, and looped it 8 times.  You can do whatever looks right to you!

What You Need:

  • Fabric Ribbon
  • Scissors
  • A small piece of String or curling ribbon
  • Double sided tape or Glue Dots

Directions:

Start with the end of the ribbon under your thumb.

Wrap the ribbon around your hand 6 to 10 times.  The more loops you do, the fuller your bow will be.  Also, the size of the loop will be the approximate diameter of your bow.



Cut the other end of the ribbon, making sure that the ends overlap at the bottom of your loops.




Hold together the center of the bow, and cut notches out of each side.  Be careful not to cut yourself when using wire ribbon…it can be hard to cut through.



Using a small piece of string or curling ribbon, tie together the layers of looped ribbon at the notches.



Turn over your bow.  While holding onto the string at the bottom of the bow, fan out the loops.  Spread each loop away from the others and twist.  Do this for all of the loops and form your bow until it looks right.



Using a piece of double sided tape or a glue dot (I like to use Zots 3D), adhere your bow to the package.  Make any final adjustments before placing the gift under the tree.  So Festive!

How to Make Your Own Paper Christmas Ornaments

Standard

At home, we have a very wide range of christmas ornaments that range from delicate, intricately painted glass to candy cane reindeer that I made when I was 5.  The tree is always such a hodgepodge!  When I moved out on my own and had to purchase my own christmas ornaments, I decided that my tree would be very chic with a silver and blue color scheme.  I have to admit, it looked fantastic!  Over the years, however, I have come to miss the hodgepodge.  I have been adding little ornaments here and there to try to mix it up a bit.  Recently, I have seen a bunch of paper globe ornaments around.  Looking around, I have found several templates, including the one shown below which I found at rubberstamping.about.com.

Using my Silhouette SD, manually digitized the above template and made my own little ornament!  I used the perforated line to “score” the folds, and it worked great!

While searching for a template for the globe ornaments, I also came across Canon’s Creative Park website.  They have tons of 3D paper creations that you can print from your home computer for free!  Each project comes with detailed directions to easily create some really cute stuff.  One of my favorites was the template for the snowman ornaments.  Check it out here.

Last Minute DIY Halloween Costume Idea: Nyan Cat (a.k.a. Poptart Cat)

Standard

There is only one full weekend left before the Halloween festivities begin!  I was originally planning for my husband and I to go as Boris and Natasha, but let’s be honest, it’s a pretty obscure reference.  You’ve probably just googled it yourself!  Last week, an idea popped into my head that I could go as Nyan Cat.  Nearly everyone knows what Nyan Cat (a.k.a. Poptart Cat) is!  If you don’t, check it out here, and be baffled by it’s absurdity!

Yes, Nyan Cat is absurd.  But it is recognizable, and would be a great DIY costume.  So,  I’m going to give it a try!  Here’s what I’m thinking…

I’m going to start by wearing a black skirt, a black t-shirt, and some long black gloves.  I have some printable iron-on paper, so I am going to print a large pop-tart and some pixellated star-like features, cut them out using my Silhouette, and iron them onto the shirt.  For my “paws” I will iron paw pads onto the palms of the hands of the gloves.

I purchased some ears and a tail from the local Halloween shop and for the rainbow, I decided to get some tall rainbow socks!  I purchased the socks at Sock Dreams in Sellwood, OR, where the staff was super friendly and helpful!  They also have an on-line shop where you can buy any type of sock imaginable!

Update 10/29/11:

I was finally able to pull it all together.  Here’s how it turned out: